| Weight | 69 lbs |
|---|---|
| Dimensions | 68 × 13 × 32 in |
| Info | See configuration builder above for options such as Fork, Shocks, Tires, etc.. |
| E-Bike Class | Class 3 (28MPH, Pedelec & Throttle) |
| Frame Type | Gen 2 Carbon Fiber Frame (2026), Low 26" Standover |
| Battery | 1440Wh 48V Quick Swap Lockable Battery |
| Range | Up to 130 Miles (at 15mph with moderate pedaling), (2-3x longer than most e-bikes) |
| Drivetrain - Motor | 750W 'TruePower' Continuous with 190Nm Torque, Optibike PowerStorm 'Whisper' Motor |
| Drivetrain - Gearing | Rohloff 14 Speed Hub, Long Life Chain – 3000+ Miles |
| Suspension | Front Suspension Fork, 150mm Front Travel, Rear Linkage Shock, 170mm Rear Travel |
| Comfort - Grips | Ergon GP2 Grips |
| Comfort - Handlebars | 35mm Diameter – Height Options: 20mm – 80mm |
| Rims | Velocity Blunt 35 32H, 27.5" Front and Rear, (Optional 29" Front) |
| Control Type | Pedelec Torque Sensor, Throttle |
| Charger | 10A Fast Charger (3 Hour Charge Time) |
Optibike · Urban Series · Hand-Built in Colorado, USA
G2 Metro – Class 3 Commuter E-Bike | 750W, 190Nm Torque | 1,440Wh Battery | Custom Built USA
A high-torque Class 3 commuter built for city streets, daily utility, and long-range road trips.
- 750Wcontinuous TruePower
- 190Nmpeak torque
- 1440Whbattery capacity
- 130 mimax range
- 28 MPHClass 3 top speed
$13,900.00Custom-built to order. Includes a build consultation with our Colorado team.
-
- Hand Built in Colorado, USABuilt and tested by Optibike technicians, not mass-produced overseas.
- Direct Factory SupportTalk to the team that builds your bike before and after delivery.
- 20+ Years of E-Bike ExperienceDesigning and supporting high-performance electric bikes since 2006.
- Custom-Built to Your SetupEvery bike is configured to order and reviewed with you before production begins.
Built to order in Colorado, typical build time 2 to 12 weeksAfter you order, our team contacts you to dial in fit, options, and setup so your bike arrives ready to ride.
The Metro is a Class 3 Commuter E-Bike for riders who want a combination of high-torque performance and extended range for daily commuting or utility use.
As a Class 3 e-bike, it provides pedal assistance up to 28 mph, allowing you to maintain higher average speeds. The 190Nm torque output provides plenty of grunt to get moving when navigating steep city grades or carrying cargo.
The PowerStorm 190Nm mid-drive gives you 750W continuous over your entire ride, no overheating, no ‘boost’ that runs out after a few minutes.
Features
- Gen 2 Carbon Fiber Frame, 26″ standover.
- 750W continuous power Optibike PowerStorm mid-drive motor, 190Nm of torque.
- Up to 130 Mile Range with a 1440Wh battery, quick swap system.
- Class 3 legal E-Bike.
- Hand Built in Colorado, USA.
Shown with additional options in some images.
Custom-built to order.
Once your order is placed, we will contact you to discuss your build and make sure everything is set up just right for you.
Build time is typically 2-12 weeks depending on current queue.
Why Optibike?
- In Business since 2006
- Hand Built in Colorado, USA
- 20+ Years of E-Bike Experience
- Personal Support from our Team
- Satisfaction Guarantee
Built to turn everyday riding into serious transportation.
Class 3 commuter
Built for faster everyday travel.
The G2 Metro is configured for commuting, urban riding, and road trips, with Class 3 pedal assistance up to 28 MPH and an optional MMI upgrade for additional class configurations.
190Nm of torque
High torque for hills and loaded rides.
The Optibike PowerStorm Motor delivers 750W Continuous TruePower and 190Nm of peak torque for steep urban grades, utility riding, and longer road trips.
1440Wh battery
Range for the long way home.
A 1440Wh battery supports up to 6.8 hours of ride time and up to 130 miles of maximum range, depending on terrain, speed, rider input, and conditions.
26″ standover
A lower frame for everyday usability.
The Gen 2 carbon fiber frame uses a low 26-inch standover height, helping make mounting and dismounting easier during frequent stops and daily riding.
Rohloff 14-speed hub
A drivetrain built for daily miles.
The Metro uses a Rohloff 14 Speed Hub with a long-life chain rated at 3000 to 5000 miles, pairing broad gearing with a drivetrain designed for extended use.
G2 Metro vs. a standard amateur e-bike
The Metro column uses Optibike's published specifications. The standard amateur-bike column should be reviewed and approved before publishing.
| Feature | Standard amateur e-bike | Optibike G2 Metro |
|---|---|---|
| Best for | Recreational riding and general-purpose use | Commuting, Urban Riding, Road Trips |
| E-bike class | Typically Class 1, 2, or 3 | Class 3 (Class 1, 2, or 3 with MMI Upgrade) |
| Motor | Standard e-bike motor | Optibike PowerStorm Motor |
| Continuous power | Typically lower-output recreational power | 750W Continuous TruePower |
| Peak torque | Typically lower than high-performance e-bikes | 190Nm |
| Battery capacity | Typically a single standard battery | 1440Wh |
| Ride time | Designed for shorter recreational rides | Up to 6.8 Hours |
| Max range | Typically suited to shorter trips | Up to 130 Miles |
| Drivetrain | Conventional derailleur drivetrain | Rohloff 14 Speed Hub; Long Life Chain 3000-5000 Miles |
| Frame | Commonly aluminum | Gen 2 Carbon Fiber Frame; Low 26" Standover |
| Suspension travel | Typically less travel | 150mm F / 170mm R |
| Control system | Pedal assist; throttle varies by model | Torque Sensor Pedelec; Half-twist Throttle |
| User interface | Standard display and assist controls | Color LCD with 5 Assist Levels; Optibike MMI Display (Option) |
| Top speed | Typically 20 to 28 MPH depending on class | 28 MPH |
| Charger | Standard charger | 3 Hour Charge (10A Fast Charger) |
| Weight | Varies by model and equipment | 69 lbs |
| Built to order | Usually mass-produced | Colorado, USA |
Be the first to review “G2 Metro – Class 3 Commuter E-Bike | 750W, 190Nm Torque | 1,440Wh Battery | Custom Built USA”
You must be logged in to post a review.
Reviews
There are no reviews yet.