| Weight | 69 lbs |
|---|---|
| Dimensions | 68 × 13 × 32 in |
| Info | See configuration builder above for options such as Fork, Shocks, Tires, etc.. |
| E-Bike Class | Class 1 (20MPH, Pedelec) |
| Frame Type | Gen 2 Carbon Fiber Frame (2026), Low 26" Standover |
| Battery | 1440Wh 48V Quick Swap Lockable Battery |
| Range | Up to 130 Miles (at 15mph with moderate pedaling), (2-3x longer than most e-bikes) |
| Drivetrain - Motor | 750W 'TruePower' Continuous with 190Nm Torque, Optibike PowerStorm 'Whisper' Motor |
| Drivetrain - Gearing | Rohloff 14 Speed Hub, Long Life Chain – 3000+ Miles |
| Suspension | Front Suspension Fork, 170mm Front Travel, Rear Linkage Shock, 170mm Rear Travel |
| Comfort - Grips | Ergon GP2 Grips |
| Comfort - Handlebars | 35mm Diameter – Height Options: 20mm – 80mm |
| Rims | Velocity Blunt 35 32H, 27.5" Front and Rear, (Optional 29" Front) |
| Control Type | Pedelec Torque Sensor |
| Charger | 10A Fast Charger (3 Hour Charge Time) |
Optibike · eMTB Series · Hand-Built in Colorado, USA
G2 Loki – Class 1 eMTB | 750W, 190Nm Torque | 1,440Wh Battery | Custom Built USA
A Class 1 electric mountain bike built for high-torque trail riding, long-range days, and demanding climbs.
- 750Wcontinuous TruePower
- 190Nmpeak torque
- 1440Whbattery capacity
- 130 mimax range
- 170mmfront / rear travel
$14,900.00Custom-built to order. Includes a build consultation with our Colorado team.
-
- Hand Built in Colorado, USABuilt and tested by Optibike technicians, not mass-produced overseas.
- Direct Factory SupportTalk to the team that builds your bike before and after delivery.
- 20+ Years of E-Bike ExperienceDesigning and supporting high-performance electric bikes since 2006.
- Custom-Built to Your SetupEvery bike is configured to order and reviewed with you before production begins.
Built to order in Colorado, typical build time 2 to 12 weeksAfter you order, our team contacts you to dial in fit, options, and setup so your bike arrives ready to ride.
The G2 Loki is a Class 1 E-Bike (eMTB). It is designed for riders who want high torque and high battery capacity while sticking to Class 1 regulations, which allows for pedal-assist operation on most non-motorized mountain bike trails.
Powered by the Optibike PowerStorm mid-drive motor with 190Nm of torque. The PowerStorm gives you 750W continuous over your entire ride, no overheating, no ‘boost’ that runs out after a few minutes.
Features
- Gen 2 Carbon Fiber Frame, 26″ standover.
- 750W continuous power Optibike PowerStorm mid-drive motor, 190Nm of torque.
- Up to 130 Mile Range with a 1440Wh battery, quick swap system.
- Class 1 legal eMTB.
- Hand Built in Colorado, USA.
Shown with additional options in some images.
Custom-built to order.
Once your order is placed, we will contact you to discuss your build and make sure everything is set up just right for you.
Build time is typically 2-12 weeks depending on current queue.
Why Optibike?
- In Business since 2006
- Hand Built in Colorado, USA
- 20+ Years of E-Bike Experience
- Personal Support from our Team
- Satisfaction Guarantee
Class 1 trail access without giving up serious capability.
Class 1 eMTB
Built for mountain bike trails.
The G2 Loki is configured as a Class 1 e-bike for eMTB trails and mountain biking, using torque-sensor pedal assist without a throttle.
190Nm of torque
High torque for steep terrain.
The Optibike PowerStorm Motor delivers 750W Continuous TruePower with 190Nm of peak torque for demanding climbs and technical trail riding.
1440Wh battery
More capacity for longer trail days.
A 1440Wh battery supports up to 6.8 hours of ride time and up to 130 miles of maximum range, depending on riding conditions.
170mm front and rear
Trail-focused suspension travel.
With 170mm of suspension travel at both the front and rear, the Loki is configured for mountain biking and rougher trail terrain.
Rohloff 14-speed hub
A drivetrain built for long service life.
The Loki uses a Rohloff 14 Speed Hub paired with a long-life chain rated at 3000 to 5000 miles.
G2 Loki vs. a standard amateur e-bike
The Loki column uses Optibike's published specifications. The standard amateur-bike column should be reviewed and approved before publishing.
| Feature | Standard amateur e-bike | Optibike G2 Loki |
|---|---|---|
| Best for | Recreational riding and general-purpose use | eMTB Trails, Mountain Biking |
| E-bike class | Typically Class 1, 2, or 3 | Class 1 (Legal on all MTB trails) |
| Motor | Standard e-bike motor | Optibike PowerStorm Motor |
| Continuous power | Typically lower-output recreational power | 750W Continuous TruePower |
| Peak torque | Typically lower than high-performance e-bikes | 190Nm |
| Battery capacity | Typically a single standard battery | 1440Wh |
| Ride time | Designed for shorter recreational rides | Up to 6.8 Hours |
| Max range | Typically suited to shorter trips | Up to 130 Miles |
| Drivetrain | Conventional derailleur drivetrain | Rohloff 14 Speed Hub; Long Life Chain 3000-5000 Miles |
| Frame | Commonly aluminum | Gen 2 Carbon Fiber Frame; Low 26" Standover |
| Suspension travel | Typically less travel | 170mm F / 170mm R |
| Control system | Pedal assist; throttle varies by model | Torque Sensor Pedelec |
| User interface | Standard display and assist controls | Color LCD with 5 Assist Levels |
| Top speed | Typically 20 to 28 MPH depending on class | 20 MPH |
| Charger | Standard charger | 3 Hour Charge (10A Fast Charger) |
| Weight | Varies by model and equipment | 69 lbs |
| Built to order | Usually mass-produced | Colorado, USA |
Be the first to review “G2 Loki – Class 1 eMTB | 750W, 190Nm Torque | 1,440Wh Battery | Custom Built USA”
You must be logged in to post a review.
Reviews
There are no reviews yet.